<< VIA Kernel Panic with Sangoma S518 ADSL Cards | Home | Duran Duran Greatest Hits DVD - Easter Eggs >>

Shuttle XPC-SK41G with XP2600+

Upgraded my little old Shuttle XPC-SK41G from an AMD Duron 1.3ghz to an XP 2600+ and couldnt get the speed up above 1150mhz after much digging about realised that the FSB is set to 100mhz by a jumper,

 it is jumper JP2, you need to remove it and the FSB then runs at 133mhz and got a speed of 1536mhz out of the new chip.  The jumper is located at the rear left, mine had a red jumper on it !!

Shame these old shuttles dont have 333mhz FSB then would get even more speed out of them ah well, when I completely upgrade the PC....

Print | posted on Saturday, May 07, 2005 1:44 PM

Feedback

# re: Shuttle XPC-SK41G with XP2600+

Left by CliveSinclair@IHateAmstrad.com at 5/10/2005 4:23 PM
Gravatar God damn, I tried this and now my ZX80 can now search the internet quicker than www.google.com

Your comment:





 
Please add 5 and 7 and type the answer here:

Disclaimer: Paul Farrow is not responsble for any damage, direct or indirect,
caused by the use of the information on this site. Use at your own risk.

Design by Bartosz Brzezinski

Design by Phil Haack Based On A Design By Bartosz Brzezinski